Hardy HI 6300 Series - Manual (Page 112)

102 Chapter 7
•
•
•
•
•
•
Determining Piece Count:
If the weight of an individual piece is known:
Select Unit Weigh by pressing ENTER and input the unit weight value using the up, down,
right and left arrows.
If the weight of an individual piece (or pieces) is unknown:
Place the sample or samples onto the scale and then press enter while Weigh Sample is
selected. The instrument will record that weigh value of the sample size. If more than one
piece was used during Weigh Sample, input the Sample Size using the arrow keys.
NOTE: Be sure the scale has been Zero’d before determining piece count.
Hint: It is better to take the Weight Sample of a larger number of pieces when the weight of
individual pieces varies.
On the Web page: first select Count Enabled, and then either enter the weight of a unit in
the unit weight field, or use the weigh sample field entering the correct number of pieces in
the Sample size field as shown above. Then click on the weigh sample field.