Hardy HI 6300 Series - Manual (Page 66)

58 Chapter 5
•
•
•
•
•
•
On the HI 6300 series instrument display, select the communication menu and use
the UP or DOWN button to select the Modbus-RTU submenu, then select the Slave
Address menu item. The current Slave Address value will be displayed, press the
ENTER or the RIGHT button if the Slave Address needs to be modified.
Baud Rate Parameter
No specific baud rate is specified for Modbus-RTU, the Baud Rate parameter is used
to match the baud rate set by the master device, typically 9,600 or 19,200.
On the Web page, select the communication menu and then select the Modbus RTU
submenu and left click inside the Baud Rate text field and enter the Baud Rate.
On the HI 6300 series instrument display, select the communication menu and use
the UP or DOWN button to select the Modbus-RTU submenu, then select the Baud
Rate menu item. The current Baud Rate value will be displayed, press the ENTER or
the RIGHT button if the value needs to be modified.
Parity Parameter
The Parity parameter has three options, EVEN, ODD, or OFF.