Hardy HI 6300 Series - Manual (Page 61)

Instrument Configuration 53
•
•
•
•
•
•
On the HI 6300 series instrument display, select the calibration menu and use the UP or
DOWN button to select the Hard Cal submenu, then select the Span weight menu item. The
current Span Weight value will be displayed, press the ENTER or the RIGHT button if this
value needs to be modified.
Cal Date Parameter
The Cal Date parameter is used to record the date when the last calibration was completed
on the HI 6300 series instrument. The format is
mm/dd/yyyy
On the Web page, select the calibration menu and left click inside the Cal Date text field
and enter the date the calibration was completed.
On the HI 6300 series instrument display, select the calibration menu and use the UP or
DOWN button to select the Cal Date submenu. The last Cal Date value will be displayed,
press the ENTER or the RIGHT button if this date needs to be modified.
Communication Menu
The following parameters are used to setup instrument communication
• Ethernet TCP/IP
o DHCP
o Fixed IP
o Dynamic IP
o Mask Address
o Gateway Address
o DNS Server
• Ethernet UDP
o Hardy Port