Hardy HI 6300 Series - Manual (Page 20)

12 Chapter 3
•
•
•
•
•
•
Step 2. A thin plastic template comes with the product. Make the hole pattern in the panel
door or cover using the dimensions provided on the diagrams below.
Panel Hole Dimensions (not displayed to scale)
A printable template is available on the Hardy website. Printers and copy machines can
distort or reduce the template measurements shown above. If you are not using the plastic
template included with the product, verify the dimensional accuracy of any paper template
before use.
CAUTION: We recommend installing the HI 6300 in a NEMA 4, 4X or IP 55 rated enclosure or better.
ATTENTION Nous vous recommandons d'installer le HI 6300 dans un boîtier NEMA 4, 4X ou IP 55
ou mieux.