Hardy HI 6300 Series - Manual (Page 85)

Instrument Configuration 77
•
•
•
•
•
•
On the HI 6310 instrument display, select the Operations menu and use the UP or DOWN
button to select the Piece Count submenu. Select Count Enable to allow the option of
running the instrument in count mode.
Piece Count can be displayed on the main screen by pressing the MODE button and cycling
through to the count mode: GROSS > NET > COUNT >
Determining Piece Count:
If the weight of an individual piece is known:
Select Unit Weigh by pressing ENTER and input the single unit weight value using the UP,
DOWN, RIGHT and LEFT arrows.
If the weight of an individual piece (or pieces) is unknown:
Place a sample or samples onto the scale and enter the number of pieces being used for the
"sample size".
To weigh the items: Place the items to be counted onto the scale and then press enter while
Weigh Sample is selected. The instrument will then count the items on the scale.