Hardy HI 6300 Series - Manual (Page 77)

Instrument Configuration 69
•
•
•
•
•
•
On the HI 6310 instrument display, select the display menu and use the UP or DOWN
button to select the Split Screen submenu, then select the Display Order menu item. The
current instrument sequence is displayed:
Instrument A
Instrument B
Instrument C
Instrument D
Use the UP or DOWN buttons to select the instrument to change and press ENTER to “pick
up” the instrument, then use the UP or DOWN buttons to move the instrument UP or
DOWN in the sequence list. Once the instrument is in the correct position in the instrument
sequence then press ENTER to “set down” the instrument and establish the new instrument
sequence. This process can be repeated until the instruments are in the required order.
Instrument ID Parameter
The Instrument ID parameter provides unique identification for the HI 6310 instrument.
RANGE: 19 Characters (default BLINST)
On the Web page, enter a name to identify the instrument in the Instrument ID text field.
We used “HI BLI.” In this example.
On the HI 6310 instrument display, select the Setup menu and use the UP or DOWN
button to select the Instrument ID menu item. The current Instrument ID will be displayed,
press the ENTER or the RIGHT button if this identifier needs to be modified and use the
UP, DOWN, LEFT, and RIGHT buttons to input a new identifier, then press the ENTER
button to save and exit this menu.
Mode Parameter
The mode parameter selects between the single unit mode and multiple unit mode. If you
have multiple units hooked up to the display and disable split screen mode, you will get data
from only one of the units.
On the Web page, this parameter is not configurable via the web interface.
On the HI 6310 instrument display, select the display menu and use the UP or DOWN
button to select the Split Screen submenu, then select the Mode menu. The current mode
will be displayed, press the ENTER or the RIGHT button if the mode needs to be modified.