Hardy HI 6300 Series - Manual (Page 120)

110 Chapter 8
•
•
•
•
•
•
3 Configuration Password:
• The current display lock, keypad lock, and configuration lock setting are
saved.
• The display lock is set to disabled and the MODE, TARE, and ZERO buttons
are unlocked, enabling the operator to view the current Gross or Net weight
on the front panel display, and to tare or zero the scale.
• The CONFIG button is also enabled allowing the operator to open the
configuration menus.
When the operator exits the configuration menu, the display lock and keypad lock are
set to their original settings. If no changes to the configuration lock or password
parameters were made the configuration lock is also set to its original lock settings;
otherwise the latest configuration security settings are used.
The Keypad Lock
While the keypad lock is enabled the Mode, Zero, Tare, and Configuration buttons are
disabled regardless of the configuration lock setting.
If the ENTER button is pressed the “Enter Password” page will appear on the display. At
this level of security the operator can enter one of two possible passwords for the keypad
lock or the configuration lock.
The keypad lock flowchart below shows the options and features when the keypad lock is
enabled.