Altera SoC Embedded Design Suite - Manual (Page 107)

Figure 4-61: Target Files
Running the Linux Application Debugging Sample Application
At this stage, we have a compiled Linux application and a properly configured Remote Systems
Connection. This section shows how to create a Debugger Configuration and use it to run and debug the
application.
1. Select Run > Debug Configurations… to open the Debug Configurations dialog box.
2. Right click the DS-5 Debugger and click New to create a new debug configuration.
3. Name the newly created debugger configuration, LinuxAppDebug_DevKit, by editing its name in the
Connection tab.
4. In the Connection tab, select:
a. For the Free Web Edition license, select Generic > gdb server > Linux Application Debug >
Download and Debug Application.
b. For the Subscription Edition or 30-day Evaluation Edition, select Altera > Cyclone 5 SoC > Linux
Application Debug > Download and Debug Application.
5. In the Connection tab, select the newly created RSE connection and keep the default values.
4-88 Running the Linux Application Debugging Sample Application
ug-1137
2014.12.15
Altera Corporation Getting Started Guides
Send Feedback