Altera SoC Embedded Design Suite - Manual (Page 116)

6. In SignalTap II, on the JTAG Chain Configuration > Device, select the FPGA device.
Figure 4-72: Select FPGA device
7. In SignalTap II, under SOF Manager, click the Browse "…" button, browse to the file <SoC EDS Installa‐
tion directory>/examples/hardware/cv_soc_devkit_ghrd/output_files/soc_system.sof and click Open.
Figure 4-73: Browse Program Files
8. In Signal Tap II, under SOF Manager, click the Program button to program the FPGA.
Figure 4-74: Program FPGA
9. After the FPGA is programmed, the SignalTap II will be ready to acquire:
ug-1137
2014.12.15
Cross-triggering Prerequisites 4-97
Getting Started Guides Altera Corporation
Send Feedback