Altera SoC Embedded Design Suite - Manual (Page 83)

Figure 4-41: Select USB Blaster
5. Click the Debug button from the bottom of the Debug Configurations dialog box.
6. Eclipse ask whether to switch to Debug Perspective. Click Yes to accept it.
The debugger downloads the application on the board through JTAG, enables semi-hosting using the
provided script, and runs the application until the PC reaches the main function.
At this stage, all the debugging features of DS-5 can be used, such as viewing and editing registers and
variables, looking at the disassembly code.
4-64 Running the Hardware Library Sample Application
ug-1137
2014.12.15
Altera Corporation Getting Started Guides
Send Feedback