Altera SoC Embedded Design Suite - Manual (Page 52)

Figure 4-11: Contents of "scatter.scat"
The above linker script instructs the linker on how to link the application:
• Defines OCRAM base address (0xFFFF0000) and size (0x10000)
• Loads all application sections in the OCRAM
• Allocates a maximum of 16K (0x4000) for stack an heap
5. If desired, click on the "Regions/Section" tab and you will see a graphical view of the linker script.
ug-1137
2014.12.15
Create a Linker Script 4-33
Getting Started Guides Altera Corporation
Send Feedback