Installing the altera soc embedded design suite, Installation folders, Installing the soc eds – Altera SoC Embedded Design Suite User Manual
Page 11: Installing the altera soc embedded design suite -1, Installation folders -1, Installing the soc eds -1
Installing the Altera SoC Embedded Design
Suite
2
2014.12.15
ug-1137
You must install the Altera SoC Embedded Design Suite (EDS) and the ARM Development Studio 5
(DS-5) Altera Edition (AE) Toolkit to run the SoC EDS on an Altera SoC hardware platform.
Installation Folders
The default installation folder for SoC EDS is:
• <SoC EDS installation directory>
•
c:\altera\14.1\embedded
on Windows
•
~/altera/14.1/embedded
on Linux
The default installation folder for Quartus Programmer is:
• <Quartus installation directory>
•
c:\altera\14.1\qprogrammer
on Windows
•
~/altera/14.1/qprogrammer
on Linux
Note: The installation directories are defined, as follows:
• <Altera installation directory> to denote the location where Altera tools are installed.
• <SoC EDS installation directory> to denote the location where SoC EDS is installed.
Installing the SoC EDS
Perform the following steps to install the SoC EDS Tool Suite in a Windows-based system:
1.
page of the Altera
website.
2. Run the installer to open the Installing SoC Embedded Design Suite (EDS) dialog box, and click Next
to start the Setup Wizard.
3. Accept the license agreement, and click Next.
4. Accept the default installation directory or browse to another installation directory, and click Next.
Note: If you have previously installed the Quartus
®
II software, accept the default SoC EDS installation
directory to allow the Quartus II software and the SoC EDS Tool Suite to operate together.
©
2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html
. Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
www.altera.com
101 Innovation Drive, San Jose, CA 95134