Cross trigger settings – Altera SoC Embedded Design Suite User Manual
Page 160
Advertising
Figure 5-32: Debug Configurations - DTSL Options - Edit
Cross Trigger Settings
The Cross Trigger tab allows the configuration of the cross triggering option of the SoC FPGA.
The following options are available:
• Enable FPGA > HPS Cross Trigger – for enabling triggers coming from FPGA to HPS
• Enable HPS > FPGA Cross Trigger – for enabling triggers coming from HPS to FPGA
• Assume Cross Triggers can be accessed – the user needs to select this option as a confirmation that
the Preloader was already loaded, so the DS-5 can access the cross triggering interface.
ug-1137
2014.12.15
Cross Trigger Settings
5-35
ARM DS-5 Altera Edition
Altera Corporation
Advertising