Altera SoC Embedded Design Suite - Manual (Page 153)

• Application Debug
• Connections via
gdbserver
• Connect to already running gdbserver
• Download and debug application
• Start dbgserver and debug target resident application
Depending on the selected Target, the Connections panel will look different. For Bare Metal Debug and
Linux Kernel and/or Device Driver Debug target types:
• A Target Connection option appears, and it allows the user to select the type of connection to the
target. Altera USB-Blaster and DSTREAM are two of the most common options.
• A DTSL option appears, allowing the user to configure the Debug and Traces Services Layer (detailed
later)
• A Connections Browse button appears, allowing the user to browse and select either the specific
instance for the connection (i.e. Altera USB-Blaster or the DSTREAM instance)
Figure 5-24: Connection Options for Bare-metal and Linux Kernel and/or Device Driver Debug
5-28 Connection Options
ug-1137
2014.12.15
Altera Corporation ARM DS-5 Altera Edition
Send Feedback