Altera SoC Embedded Design Suite - Manual (Page 156)

Files Options
The Files tab allows the following settings to be configured:
• Application on host to download – the file name of the application to be downloaded to the target. It
can be entered directly in the edit box or it can be browsed for in the Workspace or on the File
System.
• Files – contains a set of files. A file can be added to the set using the “+” button, and files can be
removed from the set using the “–“ button. Each file can be one of the following two types:
• Load symbols from file – the debugger will use that file to load symbols from it,
• Add peripheral description files from directory – the debugger to load peripheral register descrip‐
tions from the .SVD files stored in that directory. The SVD file is a result of the compilation of the
hardware project.
Figure 5-27: Files Settings
Debugger Options
The Debugger tab offers the following configurable options
• Run Control Options
• Option to connect only, debug from entry point or debug from user-defined symbol,
• Option to run user-specified target initialization script,
• Option to run user-specified debug initialization script,
• Option to execute user-defined debugger commands
• Host working directory – used by semihosting
• Paths – allows the user to enter multiple paths for the debugger to search for sources. Paths can be
added with “+” button and removed with “-“ button.
ug-1137
2014.12.15
Files Options 5-31
ARM DS-5 Altera Edition Altera Corporation
Send Feedback