TabletKiosk Sahara Slate PC i575/i535 - Manual (Page 102)

76 Chapter 04: Using Your Sahara Slate PC with Microsoft® Windows® 7
Speaker Configuration
This sub-tab allows you to choose what type of speaker configu-
ration is attached to your system. If you do not have any at-
tached audio devices, your configuration will default to “Stereo”
for the built-in speakers and be grayed out.
Press the play button next to the drop down menu to hear a
speaker test play. If you do not hear anything from your speak-
ers, check to make sure the volume level is turned up high
enough or not muted.
To encode surround sound audio as stereo sound for transfer
out of the analog out/headphone jack to a speaker system or
receiver capable of surround sound matrix decoding, place a
check in the “Virtual Surround” check box.
If you are playing back deep booming sound tracks that are causing
your externally connected speakers to distort, uncheck “Full-range
Speakers” to limit the output of lower frequency (deeper) sound.
Sound Effects
This sub-tab is where you can apply sound effects to your audio
playback to simulate different environments (regular room,