TabletKiosk Sahara Slate PC i575/i535 - Manual (Page 113)

Chapter 05: Securing Your Sahara Slate PC 87
6. Press R3 to Save and Exit, and then press R2 to commit the
changes and exit the BIOS.
Taking Ownership of the TPM
1. To take ownership of the TPM you can use the TPM Initializa-
tion Wizard in Windows 7.
2. Go to “START g All Programs g Accessories g Run”
3. In the Open field, type
TPM.msc
and tap the “OK” button.
4. The TPM
Management
Console
should
appear. In
the Actions
pane, tap on
Initialize the
TPM. This will
start the TPM
Initialization
Wizard.
Aptio Setup Utility - Copyright (c) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (c) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Value
F3: Optimized Defaults
f4: Save ESC: Exit
Esc/Right Click: Exit
Main Advanced Boot Security Save & Exit
TPM Configuration
Security Device Support [Disabled]
Current TPM Status Information
SUPPORT TURNED OFF
Enables or Disables BIOS
support for security device.
O.S. will not show Security
Device. TCG EFI protocol and
INT1A interface will not be
available.
Aptio Setup Utility - Copyright (c) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (c) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Value
F3: Optimized Defaults
f4: Save ESC: Exit
Esc/Right Click: Exit
Main Advanced Boot Security Save & Exit
TPM Configuration
Security Device Support [Enabled]
TPM State [Enabled]
Pending operation [None]
Current TPM Status Information
TPM Enabled Status:
[Enabled]
TPM Active Status: [Deactivated]
TPM Owner Status: [Unowned]
Enable/Disable Security
Device. NOTE: Your Computer
will reboot during restart in
order to change State of the
Device.
◄ TPM is OFF
TPM is now set to be
enabled, but the system
must be restarted
before it takes effect.
►
The TPM Management Console (TPM MC) will walk you
through the process of taking ownership of the TPM. To
access the TPM MC, you can also go to the START menu
and type
TPM.msc in the search bar and then tap on its
link in the search results window.