TabletKiosk Sahara Slate PC i575/i535 - Manual (Page 29)

Chapter 01: Getting Started 3
Slide the battery-locking tab (the tab closest to the top of the
tablet) up to the “locked” ( ) position. Once the locking tab
clicks into position, the battery should be securely seated.
Repeat for the second battery. While it doesn’t matter which bat-
tery you insert first, if you are planning on running the system
with only a single battery, it should be inserted into battery bay
one (
).
To Remove the Battery Packs
Remove the power cord from the “DC Power In” port if plugged
in to an external power supply to minimize the chance of electri-
cal shock. Turn over the Tablet PC and (optionally) place it on a
solid, clean flat surface. You can also remove the batteries while
holding the tablet if you prefer.
Slide the locking tab down to the “unlocked” ( ) position to
unlock the battery. Use your other hand to slide the battery
release latch in the direction of the arrow engraved on the tab
and hold it there. Carefully slide the battery out of its bay.
Slide the locking tab on the
battery to the locked position
to keep the battery secured
in the bay.
!
Slide the locking tab on
the battery to the unlocked
position and
@
slide the
battery latching tab in the
direction of the arrow and
hold,
#
then slide the battery
out of the bay.
!
@
#