TabletKiosk Sahara Slate PC i575/i535 - Manual (Page 135)

Chapter 06: Upgrading Your Sahara Slate PC 109
2. Remove the two (2)
screws holding the cover
in place (use a #1 Philips
head screw driver).
3. Remove the cover to
expose the expansion
module port.
4. Align the connector on
the module you wish to
install with the expansion
port on the Tablet PC.
Press down gently to
attach the module.
5. Use the two screws that
came with the module to
secure it to the Tablet PC.
To swap or remove a module, simply remove the two (2) screws
holding the module in place, remove the module and then
either attach a different module (as per the above procedure) or
replace the expansion port’s cover for protection. Be careful not
to lose the two screws that secure the expansion port cover.
Using the Sahara Slate PC with the VESA Mounting Plate or
Docking Cradle
In order to enable convenient desktop functionality or kiosk
style wall/cabinet mounting, TabletKiosk created the VESA