TabletKiosk Sahara Slate PC i575/i535 - Manual (Page 154)

128 Appendix A: BIOS Set-up
Advanced Menu
Bootup NumLock State
Sets the state of the NumLock key on the Windows virtual on-
screen keyboard as well as a USB attached keyboard.
SATA Mode Selection
Sets SATA mode to IDE, AHCI, or RAID. Mode should be set to
AHCI to use Solid State Drives (SSD).
Enter Mebx
Allows entry to the Intel® Management Engine Firmware.
Enable vPro
Enable or disable vPro functionality on systems with a vPro
compatible CPU.
FAN Calibration
Starts fan calibration test for more efficient system cooling.
Factory default should be proper. Only run this test if system has
overheating issues or fan begins to run constantly.
Aptio Setup Utility - Copyright (c) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (c) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Value
F3: Optimized Defaults
f4: Save ESC: Exit
Esc/Right Click: Exit
Main Advanced Boot Security Save & Exit
Advanced Setting
Bootup NumLock State [Off]
SATA Mode Selection [AHCI]
Enter Mebx
Enable vPro
Fan Calibration
Battery Calibration
Enable/Disable CCD
[Enable Both Side CCD]
Enable/Disable G sensor [Enable]
Wake up function
Wake on LAN from S4/S5 mode [Enable]
Programmable Button Setting
Disable/Enable Programmable Buttons [Enable]
3rd Programmable button
[Brightness up]
4th Programmable button [Brightness down]
Intel(R) Rapid Start Technology
Trusted Computing
►
►
►
►
►
►
Select the keyboard NumLock
state