Increasing image quality – Sumix SMX-150M User Manual
Page 46
Tuning Guidelines
46
SMX-150M USB2.0 Camera User Guide
Figure 4-15 Flipping image
Using the flip controls, you can rotate the image without changing the camera position
itself.
Note:
Flipping the image horizontally and/or vertically can cause distortions - horizontal lines can periodically appear
on the image.
Increasing Image Quality
You can increase the image quality by compensating the random noise of the sensor.
For this purpose, use the Average Frames controls in the Device Settings window.
Figure 4-16 Averaging frames
There are two averaging modes:
●
Last N frames: the currently displayed frame is the average of the last N frames set in
the Frames box. The picture is updating every frame
●
Pack N Frames: the currently displayed frame is the average of the last N frames set
in the Frames box. The picture is updating every N-th frame.
Note
Use the averaging only for static pictures. Displaying moving objects in the average mode will lead to the image
blurring.
To increase the image quality, you can also try enabling the following controls in the
Image Sensor Options section of the Device Settings window: