Super Systems 9120 with TS - Manual (Page 27)

SSi 9120 Touchscreen Interface
4586 – 9120 With Touch Screen Interface Page 27 of 80
Offset = 800 (starting point)
Range = 40000 (400.00)
O2 Exponent Range
This menu option will allow the user to set the Oxygen exponent range. The range is -32767 to
32768.
Alarm Setup
The 9120 controller can be configured
to use three different alarms. Each of
the alarms consists of an alarm
setpoint, alarm source, alarm type,
hysteresis, smart alarm, alarm on
delay time, and a zero SP blocks alarm
value. The alarms come from the
factory with a default configuration
dependent on the application but also
can be modified prior to shipment to
your facility or in the field by a
supervisor.
Setpoint
This value is the setpoint for the
alarm. The range is from –32767 to
32767.
Alarm Source
This value is the source of alarms used.
The options are:
PV 1 Value
PV 2 Value
PV 3 Value
Input 1 Value
Input 2 Value
Input 3 Value
Percent output 1 Value
Percent output 2 Value
Percent output 3 Value
Alarm Type
This value is the type of alarms used.
The options are:
Process High
Process Low
Band, Normally Open
Band, Normally Closed
Deviation, Normally Open
Deviation, Normally Closed