Super Systems 9120 with TS - Manual (Page 56)

SSi 9120 Touchscreen Interface
4586 – 9120 With Touch Screen Interface Page 56 of 80
initial value is the value when 0 volts is on the selected input; or on a 4-20 mA input, it would be
the value at the selected input of 4 mA. The range is –32768 to 32767.
Full scale
This is the full scale value. Clicking on this value will display an input box from which the user
can select a new value. The range is –32768 to 32767.
Decimal Point Location
This is the decimal point location value. Clicking on this value will display an input box from
which the user can select a new value. This will affect the PV value and the location of the
decimal when it is displayed. The range is 0 to 4.
Open TC
This is the open TC value. Clicking on this value will toggle between up scale, down scale, one
trip point, and two trip points.
Input Offset
The input offset value is algebraically added to the input value to adjust the input curve on read-
out. The input offset value is algebraically added to the input value to adjust the input curve on
read-out.
Note - The input offsets are unscaled . The range is –5000 to 5000.
Trip Point 1 Setpoint
This is the trip point 1 setpoint value. The range is –32768 to 32768.
Trip Point 1 Force Value
This is the trip point 1 force value. The range is –32768 to 32768.
Trip Point 1 Direction
This is the trip point 1 direction. The options are: input above setpoint or input below
setpoint.
Trip Point 2 Setpoint
This is the trip point 2 setpoint value. The range is –32768 to 32768.
Trip Point 2 Force Value
This is the trip point 2 force value. The range is –32768 to 32768.
Trip Point 2 Direction
This is the trip point 2 direction. The options are: input above setpoint or input below
setpoint.
High Input Limit Setpoint
This is the setpoint for the high input limit. The range for this can be –32768 to 32768.
High Input Limit Hysteresis
This is the hysteresis for the high input limit. The range for this can be –32768 to 32768.