Wavecom W61PC V7.5.0 - Manual (Page 267)

WAVECOM Decoder W61PC/LAN Manual V7.5 Classifier (Optional)  257
User Interface
The CCC user interface consists of five windows:
 A sonagram and options window
 A FFT window
 A list of classified signals
 A tree view of the classified signal code check
 A text status window
The CCC is launched (in manual mode by default) by selecting the Classifier
menu from VHF/UHF-DIR | Analysis | Classifier Code Check or from
VHF/UHF-SUB | Analysis | Classifier Code Check or by pressing the CCC
button when the previously launched mode or analysis was a VHF/UHF-DIR or
VHF/UHF-SUB mode or analysis.
The CCC may be restarted using the Start/Restart Classifier Code Check
button.
When the CCC is launched, a label positioned on the left-hand side of the up-
permost status bar indicates the level of processing selected.
The uppermost status bar will show the current status of the CCC.
Sonagram Window and Settings Dialogues
For details on the sonagram window refer to the section on “
Sonagram ” on page 70.
When the CCC is launched from the VHF/UHF-DIR menu, the frequency range displayed in the sonagram
window spans the selected classification bandwidth around the currently set translation frequency. When
the CCC is launched from the VHF/UHF-SUB menu (as is the case in the above figure), the frequency