Data base fields, Help menu – Wavecom W61PC V7.5.0 User Manual
Page 277
WAVECOM Decoder W61PC/LAN Manual V7.5
Classifier (Optional)
267
Help menu
Pressing the Help menu will allow the user to display basic application information.
Data Base Fields
The individual fields of the data base are described below. Please be aware that certain fields are manda-
tory and must be filled – an error message is displayed if such a field has not been filled.
Bandwidth [Hz]
Enter the required receiver bandwidth for this signal.
Baud Rate [Bd]
or Symbol Rate [Bd]
Enter the channel rate in Bd. For two-condition signals, e.g. FSK, PSK-2 or
CW, the baud rate equals the bit rate including channel coding overhead if
any. For two-condition signals without any overhead, the baud rate equals
the user or source bit rate.
Codecheck Count
The number of times the code check must be executed to obtain the desired
confidence level.
Comments
A user free text field.
Decoder
Enter the WAVECOM decoder mode used by the CCC. Selected from a drop-
down list of available modes.
Name
The name given to the table entry by the user. This field is a free text field.
Modulation
The modulation method used by the decoder. Set by default or selected from
a drop-down list of modulation methods available for the selected decoder.
ITU Designator
A user free text field for the ITU emission designator applicable to this signal.
Minimum No. of Carriers The minimum number of carriers in a multi-carrier system.
Minimum No. of Chan-
nels
The minimum number of channels in a VFT system.
Minimum No. of Tones
The minimum number of tones in a multi-frequency system.
No. of Carriers
The number of carriers in a multi-carrier system.
No. of Channels
Number of channels in a VFT system.
No. of Tones
The number of tones in a multi-frequency system.
Pilot Frequency [Hz]
If applicable, the frequency of the system pilot frequency, pilot tone or Dop-
pler correction tone.
Recognition disabled
If checked the signal is not included in the CCC recognition process and the
record is greyed out in the list of records.
Shift [Hz]
The frequency shift for two-frequency FSK.