H3C Technologies H3C SecPath F1000-E - Manual (Page 181)

169
Figure 115 IPsec policy configuration page
Table 13 Configuration items
Item Description
Policy Name Enter a name for the IPsec policy.
Sequence Number
Enter a sequence number for the IPsec policy.
In an IPsec policy group, an IPsec policy with a smaller sequence number has a
higher priority.
Template
Select an IPsec policy template.
IMPORTANT:
If you select an IPsec policy template, all subsequent configuration items but the
aggregation setting are unavailable.
IKE Peer
Select an IKE peer for the IPsec policy.
You configure IKE peers by selecting VPN > IKE > Peer from the navigation tree.