H3C Technologies H3C SecPath F1000-E User Manual
Page 333
321
[SecPathA] public-key local create rsa
# Request a certificate.
[SecPathA] pki retrieval-certificate ca domain 1
[SecPathA] pki retrieval-crl domain 1
[SecPathA] pki request-certificate domain 1
# Configure IKE proposal 1, using RSA signature for identity authentication.
[SecPathA] ike proposal 1
[SecPathA-ike-proposal-1] authentication-method rsa-signature
[SecPathA-ike-proposal-1] quit
# Specify the PKI domain for the IKE peer.
[SecPathA] ike peer peer
[SecPathA-ike-peer-peer] certificate domain 1
2.
Configure SecPath B:
# Configure the entity DN.
<SecPathB> system-view
[SecPathB] pki entity en
[SecPathB-pki-entity-en] ip 3.3.3.1
[SecPathB-pki-entity-en] common-name SecPathb
[SecPathB-pki-entity-en] quit
# Configure the PKI domain. The URL of the registration server varies with the CA server.
[SecPathB] pki domain 1
[SecPathB-pki-domain-1] ca identifier CA2
[SecPathB-pki-domain-1] certificate request url
http://2.1.1.100/certsrv/mscep/mscep.dll
[SecPathB-pki-domain-1] certificate request entity en
[SecPathB-pki-domain-1] ldap-server ip 2.1.1.102
# Set the registration authority to RA.
[SecPathB-pki-domain-1] certificate request from ra
# Configure the CRL distribution URL. This is not necessary if CRL checking is disabled.
[SecPathB-pki-domain-1] crl url ldap://2.1.1.102
[SecPathB-pki-domain-1] quit
# Create a local key pair using RSA.
[SecPathB] public-key local create rsa
# Request a certificate.
[SecPathB] pki retrieval-certificate ca domain 1
[SecPathB] pki retrieval-crl domain 1
[SecPathB] pki request-certificate domain 1
# Configure IKE proposal 1, using RSA signature for identity authentication.
[SecPathB] ike proposal 1
[SecPathB-ike-proposal-1] authentication-method rsa-signature
[SecPathB-ike-proposal-1] quit
# Specify the PKI domain for the IKE peer.
[SecPathB] ike peer peer
[SecPathB-ike-peer-peer] certificate domain 1