H3C Technologies H3C SecPath F1000-E - Manual (Page 410)

398
Figure 289 Enabling RADIUS authentication
b. Select the box before Enable RADIUS authentication.
c. Click Apply.
Verifying the configuration
Launch a browser on a host, and enter https://10.1.1.1/svpn/ in the address bar to enter the SSL VPN
login page, which uses RADIUS as the default authentication method and requires the verification code.
Figure 290 SSL VPN login page
Change the authentication mode to Local. Use the public account usera to log in. You can see the
resource desktop, as shown in Figure 291 . Click the resource name to access the shared desktop of the
specified host, as shown in Figure 292 .