H3C Technologies H3C SecPath F1000-E User Manual
Page 409
Advertising
397
Figure 288 Configuring RADIUS scheme named system
c.
Enter the scheme name system.
d.
Select Extended as the supported server type.
e.
Select Without domain name as the username format.
f.
Click the Add button in the RADIUS Server Configuration area.
g.
Select Primary Authentication Server as the server type.
h.
Select IPv4 and enter IP address 10.153.10.131.
i.
Enter port number 1812.
j.
Enter key expert.
k.
Enter expert again to confirm the key.
l.
Click Apply. The RADIUS server is then added to the RADIUS server list.
m.
Click Apply.
# Enable RADIUS authentication.
a.
Select VPN > SSL VPN > Domain Management > Authentication Policy from the navigation tree.
Click the RADIUS Authentication tab.
Advertising
This manual is related to the following products: