Precision Digital PD6200 - Manual (Page 101)

Model PD6200 Analog Input Rate/Totalizer Instruction Manual
101
Display Parameter Action/Setting Description
reset Reset To access the Reset menu
rht
Round horizontal
tank Set meter for round horizontal tank volume
calculation
Right Right arrow Assign digital input to Right arrow button/F1
RLY 1 Relay 1 Relay 1 setup
RLY 2 Relay 2 Relays 2-8 setup
Note: Relays 5-8 are shown, only if
expansion relay module is installed.
Rly d Disable relay Assign digital input to disable all relays
Rly E Enable relay Assign digital input to enable all relays
RSt 1 Reset 1 Program reset point 1
Rst Gt Reset
grand total To reset grand total
Rst Hi
Reset high Press Enter to reset max display
Rst HL Reset
high & low Press Enter to reset max & min displays
Rst Lo Reset low Press Enter to reset min display
Rst t Reset Total Reset total
Sanmpl
Sampling Set relay for sampling operation
sCalE
Scale Enter the Scale menu
SelEct Select Enter the Select menu (function, cutoff, out)
send Send Send meter settings to another meter
seriAl Serial Set serial communication parameters
Set 1 Set 1 Program set point 1
setup Setup Enter Setup menu
SlavId
Slave ID Set Slave ID or meter address
Source Source Select source for the 4-20 mA output
Square Square root Set meter for square root extraction
Tarest
Reset tare Reset tare