Precision Digital PD6200 - Manual (Page 6)

Model PD6200 Analog Input Rate/Totalizer Instruction Manual
6
Table of Figures
Figure 1: 1/8 DIN Panel Cutout and Mounting ................................... 16
Figure 2: Meter Dimensions - Side View ............................................ 17
Figure 3: Meter Dimensions - Top View ............................................. 17
Figure 4: Jumper Configuration for 12/24 VDC Power ..................... 18
Figure 5: Transmitter Supply Voltage Selection ............................... 19
Figure 6: Connector Labeling for Fully Loaded PD6200 .................. 20
Figure 7: Power Connections ............................................................. 20
Figure 8: Transmitters Powered by Internal Supply ......................... 21
Figure 9: Transmitter Powered by Ext. Supply or Self-Powered ..... 21
Figure 10: Voltage Input Connections ............................................... 22
Figure 11: Relay Connections ............................................................ 22
Figure 12: AC and DC Loads Protection ........................................... 23
Figure 13: Low Voltage DC Loads Protection ................................... 23
Figure 14: 4-20 mA Output Connections ........................................... 24
Figure 15: Expansion Modules & DIN Rail Mounting Kit .................. 25
Figure 16: External Relays Module Connections ............................. 25
Figure 17: Digital I/O Module Connections ....................................... 26
Figure 18. Interlock Connection ......................................................... 26
Figure 19: Acknowledge Relays w/Function Key or Digital Input ... 62
Figure 20: Meter Copy Connection .................................................... 85
Figure 21:1/8 DIN Panel Cutout Template ....................................... 103
INTRODUCTION
The P RO V U
®
PD6200 is a multipurpose, easy to use rate/totalizer ideal for flow
rate, total, and control applications. It accepts current and voltage signals (e.g.
4-20 mA, 0-10 V). Three of the front panel buttons can be custom-programmed for
specific operation.
The basic model includes an isolated 24 VDC transmitter power supply that can
be used to power the input transmitter or other devices. An additional isolated
24 VDC power supply is included with the 4-20 mA output option.
A fully loaded PD6200 rate/totalizer meter has the following: four SPDT relays,
4-20 mA output, and two 24 VDC power supplies. The PD6200 capabilities may be
enhanced by adding the following external expansion modules: four SPST relays
(creating an eight-relay rate/totalizer), two digital I/O modules with four inputs and
four outputs each, and USB, RS-232 or RS-485 communication adapters.
The eight relays can be used for alarm indication or process control applications.
The 4-20 mA isolated output, Modbus RTU serial communications, and digital I/O
options make the PD6200 an excellent addition to any system.