Precision Digital PD6200 - Manual (Page 99)

Model PD6200 Analog Input Rate/Totalizer Instruction Manual
99
Display Parameter Action/Setting Description
GT tb Grand total time
base Program grand total time base
Gtotal Grand total
password Set or enter password for manual reset
ICal Internal source
calibration Enter internal source calibration (used for
scaling the meter without a signal source
Ignore Ignore Ignore loop break condition
Info Information Display software and S/N information
Inp 1
Input 1 Calibrate input 1 signal or program input 1
value
Inp 2 Input 2 Calibrate input 2 signal or program input 2
value (up to 32 points)
Input Input Input selection
LatCH
Latching Set relay for latching operation (relays as-
signed to rate)
LED t LED test Test all LEDs
Length Length Enter the tank’s length in inches
Level Level Enter Level menu and select Yes for dual-
scale display or No for single scale display
Linear Linear Set meter for linear function and select
number of linearization points
Lit gt Grand total on
little display Assign the digital input to display the grand
total on the little display
Lit Hi
Max on little
display Assign digital input to display max on the
small display
Lit HL Max/min little
display Assign the digital input to toggle max/min
on the small display
Lit Lo Min on little dis-
play Assign digital input to display min on the
small display
Little Little display To assign the small display parameters
locd Locked Enter password to unlock meter
Lt-CLr Latching-cleared Set relay for latching operation with manual
reset only after alarm condition has cleared
(relays assigned to rate)