Precision Digital PD6200 - Manual (Page 39)

Model PD6200 Analog Input Rate/Totalizer Instruction Manual
39
p r og s Ca l e
P r o g
Ca l
P r o g
t C F
P r o g
t t b
P r o g
G r a n d
T o t a l
S e t t i n g s
t r s t
P r o g
Additional parameters, not needed for most applications, are programmed
in the Advanced Features menu; see Advanced Features Menu, page 71.
Multi-Point Calibration & Scaling
The meter is set up at the factory for 2-point linear calibration. The num-
ber of points for multi-point calibration/scaling is set up in the Advanced
Features
menu. Up to 32 linearization points may be selected. See page
78 for details.
MeterView
®
Pro Software
The meter can also be programmed using the PC-based MeterView Pro
software available for free download at www.predig.com.
Data logging for one meter at the time is available with MeterView Pro
software. More advanced data acquisition may be accomplished by us-
ing any Modbus RTU compliant software.
In order to program the meter using a computer, the meter must be con-
nected using a USB, RS-232 or RS-485 serial adapter, see ORDERING
INFORMATION on page 7 for details.
Scaling the Meter (SCALE)
The process inputs (4-20 mA and
10 VDC) can be scaled to display the
process variable in engineering units.
A signal source is not needed to scale the meter; simply program the
inputs and corresponding display values.