Initial servo af pt – Canon EOS-1D X Mark III DSLR Camera (Body Only) User Manual
Page 384
Initial Servo AF pt,
/
You can set the initial AF point for AI Servo AF/Servo AF when the AF area selection mode
is set to [
Auto selection AF
], or when the AF method is set to [
+Tracking
].
: Auto
The initial AF point for AI Servo AF/Servo AF is set automatically to suit the shooting
conditions.
[
] Initial AF pt set for
/
AI Servo AF/Servo AF starts from the manually selected AF point when the AF area
selection mode is set to [
Auto selection AF
], or when the AF method is set to [
+Tracking
].
[
] AF pt set for
AI Servo AF/Servo AF starts from the AF point that was set manually before switching
from Spot AF, 1-point AF, or AF point expansion (Manual selection
) or AF point
expansion (manual selection: surround) to [
Auto selection AF
] or [
+Tracking
].
Useful for starting AI Servo AF/Servo AF from the AF point set before switching to [
Auto
selection AF
] or [
+Tracking
].
Note
When [
AF pt set for
] is set, AI Servo AF/Servo AF starts from a zone
corresponding to your manually selected AF point even if you switch the AF area
selection mode to Zone AF or Large Zone AF, or switch the AF method to Zone AF
or Large Zone AF (vertical or horizontal).
384