FARGO electronic HDP700 User Manual
Page 33
FARGO Electronics Inc.
HDP700 Series Card Printer
2-19
2.9.8 Incomplete Transfer
Symptom: Printed image has ragged edges; HDP Film seems to have peeled off.
•
Increase the Transfer Temperature setting within the Image Transfer tab of the printer driver
as described in Section 3.2.2.
•
Increase the Transfer Temperature through the LCD as described in Section 7.3.8.
•
Ensure that the Lamination Roller makes uniform contact with the card. Confirm that the
Lamination Roller moves up and down freely and that the Thermocouple wire does not restrict
movement.
•
If incomplete transfer is limited to the leading edge, the Transfer Tension is set too high.
Decrease the Transfer Tension through the LCD as described in Section 7.3.2.
•
If incomplete transfer is limited to the trailing edge, the Transfer Tension is set too low. Increase
the Transfer Tension through the LCD as described in Section 7.3.2.