FARGO electronic HDP700 - Manual (Page 58)

FARGO Electronics Inc.
3-22 HDP700 Series Card Printer
4. Clean the rollers with one of the adhesive-backed Cleaning Cards from the Printer Cleaning
Kit. Remove the card's adhesive backing paper and slide the card between the rollers until
all dust particles are removed. See Figure 3-22. Be sure to flip the Cleaning Card over to
clean both the top and bottom Cleaning Rollers. Alternatively, placing the assembly under
lukewarm water may clean the Cleaning Roller. Ensure that the Cleaning Roller Assembly is
completely dry before reinstalling into the printer.
Figure 3-22
5. Once cleaned, replace the Cleaning Roller Assembly and close the Front Access Door.