FARGO electronic HDP700 - Manual (Page 57)

FARGO Electronics Inc.
HDP700 Series Card Printer 3-21
Figure 3-20
4. Use a Cleaning Pad from the Printer Cleaning Kit to wipe the roller clean.
5. Locate the Transfer Platen Roller. See Figure 3-21.
Figure 3-21
6. Use a Cleaning Pad from the Printer Cleaning Kit to wipe the roller clean. Press the
FORWARD and BACK buttons to move the roller back and forth while cleaning.
7. Replace the printing supplies and close the Print and Transfer Stations after the rollers are
clean and completely dry.
3.9.3 Clean the Inside of the Printer.
1. Open the Print Station and Transfer Station.
2. Remove the print ribbon and HDP Film from the printer.
3. Use a can of compressed air to blow out all visible areas of the printer interior. If you do not
have a can of compressed air, use a Cleaning Pad from the Printer Cleaning Kit to wipe out
all visible areas inside the printer. Remove any debris that may be inside. Be extremely
careful not to let any alcohol drip inside the printer!
4. Re-install the printing supplies.
5. Close the Print and Transfer Stations.
3.9.4 Clean the Cleaning Rollers.
1. Open the Front Access Door of the printer.
2. Depress the Cleaning Roller Lock.
3. Pull the Cleaning Roller Assembly out of the printer.