FARGO electronic HDP700 - Manual (Page 46)

FARGO Electronics Inc.
3-10 HDP700 Series Card Printer
3.6 K Panel Resin Tab
Figure 3-7
This option controls where the resin black (K) panel of a full-color ribbon is printed. Note that if
printing with a ribbon type that does not have a K panel, such as the YMC ribbon type, all K Panel
Resin options will be grayed out. Resin black text is desirable due to its sharp, saturated color, and
resin black barcodes
are required to ensure readability when scanned by an infrared barcode reader.
The printer driver will automatically print all TrueType black text and TrueType barcodes only with
the resin black (K) panel of the print ribbon by default.
If printing black text or barcodes that are not TrueType fonts or black graphics, select one of the three
options listed under "Print All Black With K Panel." See Figure 3-7. The printer driver will print
areas of the image where it finds black coloring with the print ribbon's resin black (K) panel as
specified by each of the following options:
1. Select the Full Card option to print the resin black (K) panel for all black found within all
areas of the image. See Figure 3-8.
Figure 3-8