Fostex D1624 - Manual (Page 106)

106
D824/D1624 Reference Manual (Changing the Initial Settings <SETUP mode>)
4
4
4
3
Tempo Map
Time signature setting Tempo setting
001 bar 4/4
005 bar 3/4
001 bar 1 = 120
003 bar 1 = 90
005 bar 3 = 60
007 bar 2 = 120
5.Press the EXECUTE/YES key.
The display shows the stored bar/beat/tempo, then
returns to the Tempo Edit indication (as shown in step
4).
6.Repeat steps 3-5 to store necessary tempo data.
For example, if you specify tempo values in the song
with [001bar 4/4
] and [005bar 3/4 ] settings, the
Tempo Map includes the settings shown in the table
below.
Modifying (or deleting) stored tempo settings
1.Repeat steps 1-3 described in the “Storing a tempo
value” section.
2.Turn the JOG dial to select bar/beat to edit or
delete.
3.Turn the SHUTTLE dial so that the flashing cursor
is on the TEMPO number.
4.Use the JOG dial to enter a new value.
Entering [- - -] deletes the data at the selected bar/beat.
5.Press the EXECUTE/YES key.
6.Press the STOP button or the EXIT/NO key
repeatedly to exit SETUP mode.
Tempo=120 Tempo=90
Tempo=60 Tempo=120