Fostex D1624 - Manual (Page 11)

D824/D1624 Reference Manual (Names and Functions)
11
* Pressing a Memory key to recall the point the key is
storing displays the memory data (time, or bar/beat/
clock) currently stored in that key; then the recorder
enters data edit mode. To edit data, use the SHUTTLE
dial to move among the digits, and then use the JOG
dial to change the value.
* After you finish editing data, press the STORE key,
and then press one of the Memory keys into which
you want to store the point. The edited data will be
stored in the specified Memory key.
* While the current position of the recorder is
indicated, press the STORE key, then one of the
Memory keys into which you want to store the data.
The current position or the recorder will be stored
in the Memory key. You can do this while the
recorder is running or stopped.
* Press a desired Memory key, and then press the
LOCATE key to locate the point stored in that Memory
key (time, or bar/beat/clock).
* In Setup mode, you can save or load song data for
each Program.
* All data will be retained after you turn off the power.
* Refer to page “ 54 ” for more information on memory
data.
* Refer to page “ 57 ” for more information on the Locate
function.
* Refer to pages “ 21 ” and “ 36 ” for more information
on the Program Change function.
* Refer to page “ 84 ” for more information on saving
and loading song data.
5. Clipboard In key [CLIPBOARD IN]
This key is used to store and recall the In point
(CLIPBOARD IN point) for the Copy or Move
operation. You can locate a stored CLIPBOARD IN
point. If you press the CLIPBOARD IN key while
holding down the SHIFT key when the recorder is
stopped, you can preview the fade-in part at the
stored CLIPBOARD IN point.
* Refer to page “ 66 ” for copying/moving data.
* Refer to page “ 57 ” for locating the CLIPBOARD IN
point.
* Refer to page “
63 ” for previewing data at the
CLIPBOARD IN point.
6. Clipboard Out key [CLIPBOARD OUT]
This key is used to store and recall the Out point
(CLIPBOARD OUT point) for the Copy or Move
operation. You can locate a stored CLIPBOARD OUT
point. If you press the CLIPBOARD OUT key while
holding down the SHIFT key when the recorder is
stopped, you can preview the fade-out part at the
stored CLIPBOARD OUT point.
* Refer to page “ 57 ” for locating the CLIPBOARD OUT
point.
* Refer to page “ 66 ” for copying/moving data.
* Refer to page “ 63 ” for previewing data at the
CLIPBOARD OUT point.
7. Auto Return Start key [AUTO RTN START]
This key is used to store and recall the start point
(AUTO RTN START point) for the Auto Return or
Auto Repeat operation. You can locate a stored AUTO
RTN START point. If you press the AUTO RTN START
key while holding down the SHIFT key when the
recorder is stopped, you can preview the fade-in part
at the stored AUTO RTN START point.
* Refer to page “ 57 ” for locating the AUTO RTN START
point.
* Refer to page “ 66 ” for copying/moving data.
* Refer to page “ 63 ” for previewing data at the AUTO
RTN START point.
8. Auto Punch In key [AUTO PUNCH IN]
This key is used to store and recall the recording
start point (AUTO PUNCH IN point) for the Auto
Punch IN/OUT operation. This point is also used as
an erase point. You can locate a stored AUTO PUNCH
IN point. If you press the AUTO PUNCH IN key while
holding down the SHIFT key when the recorder is
stopped, you can preview the fade-out part at the
stored AUTO PUNCH IN point.
* Refer to page “ 39 ” for more information about Auto
Punch In/Out recording.
* Refer to page “ 66 ” for more information about pasting
data.
* Refer to page “ 70 ” for more information about the
Erase operations.
* Refer to page “
63 ” for previewing data at the AUTO
PUNCH IN point.
9. Auto Punch Out key [AUTO PUNCH OUT]
This key is used to store and recall the recording
end point (AUTO PUNCH OUT point) for the Auto
Punch IN/OUT operation. This point is also used as
an erase point. You can locate a stored AUTO PUNCH
OUT point.
If you press the AUTO PUNCH OUT key while holding
down the SHIFT key when the recorder is stopped,
you can preview the fade-in part at the stored AUTO
PUNCH OUT point.
* Refer to page “ 39 ” for more information about Auto
Punch In/Out recording.
* Refer to page “ 70 ” for more information about the
Erase operation.
* Refer to page “ 63 ” for previewing data at the AUTO
PUNCH OUT point.
Memory keys (CLIPBOARD IN, CLIPBOARD OUT,
AUTO RTN START, AUTO PUNCH IN, AUTO PUNCH
OUT, and AUTO RTN END keys) have the following
common functions: