Fostex D1624 - Manual (Page 25)

25
D824/D1624 Reference Manual (Before Starting)
42 ∞
_
OL
0
8 7 6 5 4 3 2 1
30
24
18
12
9
6
3
16 15 14 13 12 11 10 9
program 1 program 2 program 3
program 4 program 5 program 6
program 7 program 8 program 9
You can set up to 99 programs (independent containers).
<Display example (when using the D1624)>
As described in “Managing the song by Program,” the recorder can set up as many as 99 Programs
on the disk. Setting up a Program requires a small amount of disk space. In other words, disk space
is used not only for storing recorded data but also for storing all setup data. Therefore, make sure
that you have enough space on the disk before you start recording to avoid running out of space
(the [OVER !] message flashes in that case).
Managing songs by Program Change function
The recorder features Program Select function, which enables you to set up to 99 Programs on the
disk.
When you format a disk, one Program will be automatically created on the disk. You may create
more Programs, if necessary. You may also delete unnecessary Programs.
The recorder also features Program Change function that enables you to select one of the Programs
set on the disk. Programs on the disk are something like independent containers. You can record,
play, and edit each container without affecting other containers. You can also name Programs,
which is useful for managing songs.
This is the Program indication
when using an E-IDE hard disk as
the current drive ([P] will appear
before the program number such
as [P01] shown in the example
below).
Refer to page “ 36 ” for more information on
the program select function.
Refer to page “ 36 ” for more information on
the program delete function.
Refer to page “ 37 ” for more information on
the editing a program title.
<Note>
Total available recording time is always the
maximum available recording time on the
disk, regardless of the number of Programs
you set on the disk. That is, if you use up
the maximum recording time for one
Program, you will not be able to record any
data in other Programs.
<Note>
As described in the “REMAIN indicator,”
creating additional Programs will consume
a small amount of disk space.
Refer to page “ 35 ” for more information on
the duplicating a program.