Saving data of an individual program, Press the setup key, Rotate the jog dial to select a program to save – Fostex D1624 User Manual
Page 92: Press the execute/yes key. (“sure?” flashes.), The recorder will enter the setup mode
D824/D1624 Reference Manual (Saving and Loading Song Data)
92
44.1kHz
SETUP
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
SAVE
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
SAVE
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
SAVE
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
SAVE
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
SAVE
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
SAVE
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
Saving data of an individual Program
When saving with a SCSI disk it is possible to save each program or all programs. This section will
explain the procedures to save each program.
* Output format available
: adat, DAT, SCSI 6
* Programs available
: P01 - P99
* Track available
: When using an adat or DAT: Tracks 1-8, Tracks 1-16, Tracks 1-
24, Tracks 9-16, Tracks 9-24, Tracks 17-24;
: When using a SCSI disk: All tracks will be automatically selected.
<Note>
Label each disk with a serial number (1, 2, 3...) prior to saving one program on several removable
disks. This makes it easier to load the program, as explained later.
1.Press the SETUP key.
The recorder will enter the SETUP mode.
2.Use the JOG dial to select “Save PGM?” (“?” will
flash.), and press the EXECUTE/YES key.
The indication of the type of digital signal to be saved
will flash on the display.
3.Rotate the JOG dial to select a flashing “SCSI 6,”
and press the EXECUTE/YES key. (“SURE?”
flashes.)
The digital signal to save is set on “SCSI 6”, the program
number currently set on the current drive flashes.
4.Rotate the JOG dial to select a Program to save.
You can select any existing Program individually or all
Programs (Save All). (Refer to the next section for
information on saving all Programs.)
As mentioned previously, the display indication differs
as follows depending on whether the selected Program
to save requires only one removable disk or multiple
disks.
* If you have selected a Program that has no
recorded:
* If you have selected a Program that requires only
one disk to save:
* If you have selected a Program that requires
multiple disks:
The following indication, for example, appears.
(**** is the tentative title, the program number
flashes, the information on the size of the program
and number of disks necessary, alternate.)
This display indicates that one SCSI harddisk is not
enough to save the program chosen, and that
several disks are necessary to proceed with the save
procedure. In the following example you see a “2D”
indication as the number of disks necessary.
This indicates that 2 disks are necessary to execute
the save procedure.
5. Press the EXECUTE/YES key. (“SURE?” flashes.)
The recorder performs the save operation differently
depending on the selected Program.