Fostex D1624 - Manual (Page 74)

D824/D1624 Reference Manual (MIDI Sync Function)
74
MIDI OUT
MIDI IN
Q FREQ
GAIN
Q FREQ
GAIN
Q FREQ
GAIN
+10
0
-10
-20
-30
-40
-
+10
0
-10
-20
-30
-40
-
+10
0
-10
-20
-30
-40
-
+10
0
-10
-20
-30
-40
-
+10
0
-10
-20
-30
-40
-
+10
0
-10
-20
-30
-40
-
+10
0
-10
-20
-30
-40
-
16
PAN
Q
PAN
ON ON ON ON ON ON ON
SOLO SOLO SOLO SOLO SOLO SOLO SOLO
EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT
SOLO
ON ON
SOLO
STORE RECALL
EQ ON
STORE RECALL
STORE RECALL SOLO
+1/ /-1
DATA
EXIT
ENTER
MASTER 15 14 13 12 11 10 9
1-8 ANALOG IN 9-16 ADAT IN 17-20 EFF RTN
AUX1 AUX2
AUX3 AUX4
EFF1 EFF2
ADD.AUX
+10
0
-10
-20
-30
-40
-
ADAT IN
0
-10
-20
-30
-60
-
-40
PAN PAN PAN PAN PAN PAN
-40
-36
-24
-18 -12
-9
-6
-3
OL
ST BUSS/SOLO L R
METER
CHANNEL
FADER MODE
KEY MODE
METER CHANNEL/ CH VIEW
PHASE GROUP ROUTING/ PAIR/
MMC SEND
CURRENT SCENE STATUS
SETUP SYSTEM MIDI EQ/LO EQ/LO-MID EQ/HI-MID EQ/HI-MID
FREQ
GAIN
EFF EDIT EFF 2 EFF 1
EQ LIBRARY EFF LIBRARY
SELECTED EQ
SCENE MEMORY REC BUSS
8 7 6 5 4
20 20
1 2 3
19 19 18 18 17 17
ANALOG IN ANALOG IN
EFF R EFF RTN TN
PAGE SELECT
MIDI OUT
MIDI IN
MIDI clock & song position pointer
Master Recorder
MIDI sound sources
MIDI Sequencer
MIDI Sync Function
The following are examples concerning general types of systems using MIDI related functions
contained in the recorder.
MIDI clock sync system
By setting any desired meter at any desired point of the programmable tempo map contained in
the recorder, and by output of a MIDI clock and song position pointer according to the setting, a
hardware type MIDI sequencer can be synchronized as a MIDI clock slave. Consequently, in this
system, the recorder will be the master and the MIDI sequencer the slave.
* Restore the default settings on this recorder.
* Check for the correct program and proper sampling frequency.
Connecting external equipment (Refer to connecting schematic)
1. Connect the unit MIDI OUT to MIDI IN of the MIDI sequencer.
2. Set the MIDI sequencer for “external sync mode (EXTERNAL SYNC) by MIDI clock.”
* Refer to the Owners Manual of the equipment in use for details.