Fostex D1624 - Manual (Page 57)

D824/D1624 Reference Manual (Locate Function)
57
Locate Function
44.1kHz
42 ∞
_
OL 0
8 7 6 5 4 3 2 1
30 24 18 12 9 6
3
16 15 14 13 12 11 10 9
The recorder swiftly locates (it moves the current location of the recorder section) the desired
point when necessary. Locate include edit points (in ABS time, MTC time, or in bar/beat/clock) that
are stored for the Copy, Move, Paste, Erase, or Auto Punch In/Out operations.
They also include Locate by specifying a voluntary time, and Locate specifying a voluntary Locate
Number (01-99), as well as Locate directly to the recording end point in a Program (REC END). An
application of he Locate function includes auto functions such as Auto Play, Auto Return and Auto
Repeat.
Direct Locate
The Direct Locate function enables you to locate the following points:
• Locate the beginning of the Program (LOCATE ABS 0)
Press the REWIND button while holding down the STOP
button.
The recorder will immediately locate the beginning of
the currently-selected Program.
• Locate the recording end point of the Program (LOCATE
REC END)
Press the F FWD button while holding down the STOP
button.
The recorder will immediately locate the end point of
the currently-selected Program.
• Locate the position stored in one of the memory keys
Press the desired memory key, then press the LOCATE
key.
The recorder will locate the point (edit point) stored in
the corresponding memory key immediately.
The located time data is always stored as time data in
Locate Number 00.
• Specify the Locate Number to locate data
1. Press the RECALL key.
The Locate Number selection menu
appears.
2. Turn the JOG dial or press the NEXT
key/PREV key to select the desired
number.
3. Press the LOCATE key once.
The time stored in the selected Locate
Number appears.
4. Press the LOCATE key again.
The time data of the selected LOCATE number is swiftly
located. The located time data is constantly stored as
time data in Locate Number 00.
• Locate a specified point
Refer to “Editing and storing locate data” in the chapter
“Storing a Locate Point (Edit Point)” for information
on how to edit the data and on pressing the LOCATE
key instead of the STORE key.
The point at specified time value (or bar/beat/clock
value) will be located immediately.
• Locate the last-located point
Directly press the LOCATE key.
The time data of Locate number 00 is located. Locate
number 00 is always update with the last data located
(excluding LOCATE ABS 0 and LOCATE REC END).
Therefore, you will locate the data in memory number
00 every time you directly press the LOCATE key.