Fostex D1624 - Manual (Page 133)

133
D824/D1624 Reference Manual (MIDI Implementation Chart/MMC List)
33 3E (<edit message>): product new program status reply
This is the reply against the "13 3E" product new program
command.
33 41 (<channel> <channel>): digital in channel status reply
33 41 (<channel=7F> <count> <mmc track>): adat in status
reply
This is the reply against the "23 41" digital in ch. st. request.
The first <channel> indicates the track number assigned to the
L channel of the digital audio signal (S/P DIF) from the DATA
IN connector, and the second <channel> the track number as-
signed to the R channel. If digital in is set to "Adat," the reply
for the first <channel> will be 7F and then <count> <mmc
track>, in this order. In the <mmc track>, the track bit map
which is the Adat input, is expressed by "1" (In this equipment,
the reply will all be "1", or in other words, all tracks will be
collectively converted to Adat inputs or analog inputs).
33 42 (<channel> <channel>): digital out channel status reply
33 42 (<channel=7F> <channel=00>): adat out status reply
This is the reply against the "23 42" digital out ch. st. request.
The first <channel> indicates the track number assigned to the
L channel output of the digital audio signal (S/P DIF) from the
DATA OUT connector, and the second <channel> the track
number as signed to the R channel output. If digital out is set
to "Adat," the reply for the first <channel> will be 7F and that
for the second <channel> will be 00.
33 43 (<program>): program status reply
This is the reply against the "23 43" program status request.
<program> indicates the presently operating program num-
ber.
33 44 (<on/off>): click status reply
This is the reply against the "23 44" click status request.
It indicates the on/off setting of the metronome function.
33 45 (<count=10><level data>): level status reply
This is the reply against the "23 45" level status request and it
indicates the present track 1-16 output level data.
In D824/D1624, as level data is updated 40msec., it will be
effective if inquiry is made in 40msec. units.
33 46 (<on/off>): bar/beat resolution status reply
This is the reply against "23 46" bar/beat resolution status
request.
33 47 (<midi sync>): midi sync out status reply
This is the reply against "23 47" midi sync out status request.
33 48 (<MTC offset mode>): MTC offset mode status reply
This is the reply against "23 48" MTC offset mode status re-
quest.
33 49 (<count=3> <on/off> <vari data>): vari pitch status reply
This is the reply against "23 49" vari pitch status request and is
indicating the vari pitch function on/off and the present vari
pitch setup figure.
34 01 (<signature map>): signature map status reply
This is the reply against "24 01" (<event number>) signature
map request. The signature map of the event indicated by the
<event number> is replied. If there is no event specified (Ex-
ample: Such as when <event number=5> is requested even
though there is only 5 meters registered), it will be replied with
all figures at 00 of the <signature map>.
34 02 (<tempo set map>): tempo set map status reply
The reply against "24 02"(<event number>)tempo set map re-
quest. Tempo set map of the event indicated by the <event
number> is replied. If there is no event specified (Example:
Such as when <event number=20> is requested although only
10 is setup for tempo), it will be replied with all figures at 00 of
the <signature map>.
34 04 (<mmc time>): preroll set map status reply
This is the reply against "34 04" preroll time status request
and this is replied with the presently set preroll time.
34 05 (<mmc time>): remain time reply
This is the reply against "24 05" remain time request, and is
replied with the recordable disc remaining time.
34 06 (<frame rate>): frame rate status reply
This is the reply against "24 06" frame rate status request, and
is replied with the presently set frame rate.
34 07 (<fs rate>): fs rate status reply
This is the reply against "24 07" fs rate status request, and is
replied with the presently set fs (sampling frequency).
34 08 (<time base>): time base status reply
This is the reply against "24 08" time base status request, and
is replied with the presently set time base (in the display).