Fostex D1624 - Manual (Page 17)

D824/D1624 Reference Manual (Names and Functions)
17
Rear panel section (D824)
Rear panel section (D1624)
1. Panel A for an optional card
[When using the D824]
This is the panel used for installing the optional Model
5042 (balanced 8-8 I/O card), and the optional Model
8350 (8-8 I/O AES/EBU card). In general, leave the panel
in place if these are not installed.
[When using the D1624]
This is the panel used for installing the optional Model
5043 (balanced 8-16 I/O card), or the optional Model
8350 (8-8 I/O AES/EBU card x 2). In general, leave the
panel in place if these are not installed.
<Note>
The options must be installed by a Fostex Service Station.
For details, please inquire at your nearest Fostex Service
Station.
2. Panel B for an optional card
This is the panel used for installing the optional
Model 8345 (TC/SYNC card). The Model 8345 gives
the recorder have LTC input and output connectors.
Also, the sync lock with video sync will be possible.
In general, leave the panel in place if this is not
installed.
3. WORD IN terminating switch
This is the WORD IN port terminating switch (75 Ω ).
Turn this ON when inputting an external word clock
signal into the WORD IN connector from digital
equipment.
4. WORD INPUT connector (Connector: BNC)
Word clock signal from external digital equipment
is input here for the purpose of phasing with external
digital equipment.
5. WORD OUTPUT connector (Connector: BNC)
Word clock signal from the recorder is output to
external digital equipment.
<Note>
Model 5043 and Model 8350 (x 2) cannot be installed
at the same time.
1 2 2 3 4 5 6
7 8 9 10 11 12 13 14 15
OPTICAL
1 2 2 3 4 5 6
7 8 9 10 11 12 13 14 15