Loading wav files, Select the wav file to be loaded with the jog dial, Select wav file, then press the execute/yes key – Fostex D1624 User Manual
Page 99: Select the track, then press the execute/yes key, Press the exit/no key or the stop button, The setup mode menu will be displayed, Completed] will be extinguished
D824/D1624 Reference Manual (Saving and Loading Song Data)
99
44.1kHz
SETUP
LOAD
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
SURE?
LOAD
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
REMAIN
LOAD
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
LOAD
SURE?
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
Loading WAV files
WAV files will be loaded. Prior to this, make sure the backup disk is connected to the SCSI ID6
equipment. The following explains how to use a backup disk in which WAV files were saved by this
unit.
1.Enter the SETUP mode by pressing the SETUP key.
The SETUP mode menu will be displayed.
2.Select “Load PGM?” (“?” flashes) with the JOG
dial and press the EXECUTE/YES key.
The currently set content will be displayed (flashing).
3.Select the flashing “SCSI 6” with the JOG dial and
press the EXECUTE/YES key.
After display of [Drive name] and [DOS format], the WAV
file name and its capacity is displayed and [SURE?] will
flash at the same time.
“No SCSI Disk!” will be displayed if no disk is loaded.
4.Select the WAV file to be loaded with the JOG dial.
If a multiple number of WAV files with different file
names (Beginning 6 letters) have been saved, the WAV
file names (beginning 6 letters) and capacity will be
sequentially displayed. If [Eject] is selected, the backup
disc can be removed.
<Note>
File names other than “******##.WAV” cannot be
acknowledged nor loaded by this recorder. WAV files
with the beginning 6 letters of the file name will be
individually acknowledged and can be selected.
5.Select WAV file, then press the EXECUTE/YES key.
The display will change to selecting the track to be
loaded. [All Trk] will flashes.
If the JOG dial is rotated at this stage, [01]-[24] (mono
tracks) can also be selected in addition to [All Trk].
6.Select the track, then press the EXECUTE/YES key.
The display will change to selecting the program to be
loaded (current drive).
The program can now be selected with the JOG dial.
The [Title] & [New PGM] now displays the WAV file to
be loaded.
The [Title] & [Capacity] display changes to the WAV file
program to be loaded by deleting the selected program.
<Note>
If there is insufficient capacity in the current drive to
load a WAV file, the capacity will be indicated in minus
as [-###].
In such a case, select a program of a the right size or
delete an unnecessary program by using the SETUP
mode “Delete PGM##.”
7.After selecting the program to load, press the
EXECUTE/YES key.
Loading is immediately executed when loading a new
program ([Title] & [New PGM] .
If program loading for replacing had been selected
([Title] & [Capacity] is selected), [Overwrite?] and [SURE?]
will be displayed.
Load is executed when the EXECUTE/YES key is pressed
again.
The following will be displayed during load. As load
progresses, the capacity indication will count down.
Upon completion of the load, the display will return to
the original time base and [COMPLETED] is displayed.
<Note>
The title of the loaded program will be replaced by the
WAV file name (beginning 6 letters) which is loaded.
8.Press the EXIT/NO key or the STOP button.
[COMPLETED] will be extinguished.
Press the EXIT/NO key or the STOP button to return
to an earlier step or stop.