Fostex D1624 - Manual (Page 60)

60
D824/D1624 Reference Manual (Cue & Review Function)
5
Cue & Review Function
2
1, 4
1
This chapter explains how to use the “Cue & Review” function with the REWIND button, the F FWD
button, and the SHUTTLE dial, and also explains “Digital Scrubbing” with the envelope function.
During Cue/Review and Digital Scrubbing you will hear the sound recorded on the disk, which
makes it easy for you to swiftly locate the desired point without failure while listening to the
sounds.
The prerequisite of the following operation is that the time base is ABS, however, the operation can
be executed in any time base. To execute this function with a non-ABS time base there is a need to
priory switch over to the desired time base.
Cue & Review function using the REWIND and F FWD buttons
You may cue & review the audio data at five-times speed while the recorder is playing.
1. Press the PLAY button to play the audio data.
2. Press the F FWD button during playback.
This cues in the forward direction at five-times speed.
The PLAY LED and F FWD LED lights up while cuing is
taking place.
3. Adjust the monitor sound of the track to monitor on the
mixer.
4. Press the PLAY button again to restore the original play
back speed.
5. Press the REWIND button instead of the F FWD button.
This cues in the rewind direction at five-times speed.
The PLAY LED and REWIND LED lights up while cuing is
taking place.
6. Press the PLAY button to restore the original playback
speed.
Cue & Review function using the SHUTTLE dial
You can use the SHUTTLE dial for +1~-7 times or -1~-8 times
1. Press the PLAY button to start playback.
2. Turn the SHUTTLE dial clockwise during playback.
The forward direction cue speed variates from +1~ -7
times speed depending on the degree (angle) of turning
the dial. PLAY LED flashes and F FWD LED lights up
during the cue process.
3. Adjust the monitor sound of the track to monitor on the
mixer.
4. Let go of the SHUTTLE dial to return to normal play
speed.
5. Similarly, turn the SHUTTLE dial counterclockwise
during playback.
The rewind direction review speed variates from -1~ -8
times speed depending on the degree (angle) of turning
the dial. PLAY LED flashes and REWIND LED lights up
during the review process.
6. Let go of the SHUTTLE dial to return to normal play
speed.
Digital scrubbing using the envelope function
You may perform digital scrubbing using the “Envelope Function” of the recorder while the recorder
is stopped. The envelope function allows digital scrubbing for each track recorded. The display
will show the envelope indication of the track selected.