Fostex D1624 - Manual (Page 61)

61
D824/D1624 Reference Manual (Cue & Review Function)
Playback point (time)
Playback point
Track indication
42 ∞
_
OL
0
4
30
24
18
12
9
6
3
42 ∞
_
OL
0
4
30
24
18
12
9
6
3
42 ∞
_
OL
0
8
30
24
18
12
9
6
3
5. Press the STOP button to stop the envelope function.
Doing so will turn OFF the envelope function.
The recorder will return to the time base indication prior
to turning the envelope function ON.
1. While the recorder section is stopped, depress the
SHIFT key and then press the RECORD TRACK select
key of the desired record track.
This turns ON the envelope function.
The envelope indication of the selected track will appear
on the display. The following example shows the
indication of track 4 envelope, after RECORD TRACK
select key [4/12] is pressed. At this time the recorder is
in the STILL status (scrub mode is in still status) and the
REWIND LED and F FWD lights up.
2. You can use the JOG dial to digitally scrub the
performance of the track selected.
The envelope of the performance recorded on the track
variates in real-time. During forward direction scrub
the F FWD LED lights up, and during rewind direction
scrub the REWIND LED lights up.
3. Adjust the monitor sound of the selected track so that
it can be monitored on the mixer.
4. Press the RECORD TRACK select key of the desired
record track to select another track.
[Please Wait!] will briefly appear and then go to the
envelope indication of the selected track.
The following example shows the case when the
indication is switched from track 4 to track 8.