Genicom 3850 User Manual
Page 100
96
Reduce Vertical Slew
N
: Forward and reverse vertical slew occurs at full speed.
Y
: Forward and reverse vertical slew occurs at half speed.
For heavier multipart forms or for label stock, you may select
REDUCE SLEW (Y).
SPEC: REDUCE SLEW
ENTER
SPEC:RED SLEW>N
↓
SPEC:RED SLEW:Y
↓
Labels
Y
: Inhibits a backward motion, inhibits tear off and parks in forward direction. In order to
prevent reverse feeding (and thus reduce chance of label peeling), you may select
LABELS:Y
.
N
: Sets normal operation.
SPEC: LABELS
ENTER
SPEC:LABELS>N
↓
SPEC:LABELS:Y
↓
Text Direction
BI
: All text print modes are printed in bid-directional mode.
UNI
: All text print modes are printed uni-directional mode. In order to obtain even higher
line-to-line character alignment, you may select uni-directional (UNI) text mode.
SPEC: TEXT DIRECT
ENTER
SPEC:TEXT>BI
↓
SPEC:TEXT:UNI
↓